Wood Primer EP770 with Hardener 2291

Product Overview:

Resin Primer 770 is a unique resin designed for priming wood and wood-based products. It is primarily used in the priming stage of wooden surfaces in resin table top manufacturing or for embedding pieces for jewelry and decorative items. The primer, which consists of resin and hardener, has a low viscosity and high penetration ability, allowing it to deeply infiltrate wood and seal its pores. When used in resin tabletops, it prevents air bubbles and wood breathing issues caused by epoxy primer penetration.

How to Use Wood Primer EP770 with Hardener 2291?

Pre-Application Control and Recommendations:

Ensure that all mixing tools and containers are clean and free of dust or contaminants.

Application Method:

Materials:

Wood Primer EP770

Hardener 2291

Main Tools:

Clean stirrer

Paintbrush for application

Application Steps:

1. It is recommended to place the resin primer near a heater one day before use during cold seasons.
2. Ensure the primer and hardener are within the temperature range of 20-30°C when mixing.
3. Mix the primer and hardener in a 32% ratio, i.e., for every 100 grams of Wood Primer EP770, add 32 grams of Hardener 2291.
4. Stir the resin primer in a mother container slowly for one minute with a clean stirrer.
5. Mix the resin and hardener gently for 2 minutes with a clean stirrer. Allow the mixture to rest for 5-10 minutes to allow air bubbles to escape, then apply the mixture to the surface with a brush.
6. Drying time is 24 hours.

Key Tips for Improved Quality:

• If the primer and hardener are not mixed correctly, the primer will not dry.
• Use an accurate scale to measure both primer and hardener.
• Avoid vigorous stirring of the resin and hardener.
• Clean brushes with epoxy solvent.
• Always weigh the hardener accurately with an industrial scale.

Drying Time and Temperature Recommendations:

• Initial Drying Time: 8-12 hours
• Final Drying Time: 24 hours
• Application Temperature: 20-30°C
• Storage Temperature: Avoid temperatures below 5°C to prevent freezing.

Technical Specifications of Wood Primer EP770 with Hardener 2291:

• Abrasion Resistance: Fully protective
• Water Resistance: Fully resistant

Features of Wood Primer EP770 with Hardener 2291:

• High penetration ability into wood pores
• Resistance to water, chemicals, impact, and abrasion

Applications of Wood Primer EP770 with Hardener 2291:

• Priming wood for resin tabletops
• Priming embedded parts for jewelry making
• Priming decorative wood-resin (WoodGlass) parts

Physical and Chemical Properties:

• Application Temperature: 20-30°C
• Initial Drying Time: 8-12 hours
• Final Drying Time: 24 hours

Storage and Handling of Wood Primer EP770 with Hardener 2291:

• Packaging: 600-gram containers
• Shelf Life: 12 months in original packaging
• Storage Conditions: Keep in a dry place away from direct sunlight, water, and rain. Avoid temperatures below 5°C to prevent freezing.

Safety and Protection:

While epoxy resin is not toxic, it is advisable to wear gloves, goggles, and protective clothing during application. In case of contact with skin or eyes, wash immediately with water.

Standards and Certifications:

• Complies with BS EN14891 (UK Standard)
• Complies with AS/NZS 4858 (Australia-New Zealand Standard)
• Technical certification from the Center for Housing and Urban Development Research
• Only factory with industrial standards in Iran
• Certified by ISO 9001, 14001, 18001, IMS

SEO Optimization Suggestions:

• Title Tag: Wood Primer EP770 with Hardener 2291 – High Penetration Epoxy Resin for Wood Protection
• Meta Description: Discover the unique Wood Primer EP770 with Hardener 2291. A two-component epoxy primer offering excellent penetration for wood protection, ideal for resin tabletops and decorative items.
• Key Keywords: “wood primer,” “epoxy resin primer,” “wood protection primer,” “resin tabletop primer,” “high penetration epoxy primer.”