Epoxy EP64 Adhesive

Introduction to Epoxy Adhesive EP64:

The two-component epoxy adhesive for construction materials (Manapoxy EP64) is a paste-based adhesive made from epoxy resin and modified amine hardener. The Epoxy adhesive is solvent-free, and its volatile organic compounds are minimal. This adhesive boasts excellent adhesion and mechanical strength, forming a permanent bond. It is designed and formulated for both dry and wet environments. This is one of the most popular and widely used products of Mandana Polymer Engineering. This adhesive has verified by quality control tests and standards before mass production.

Features and Benefits of Epoxy Adhesive EP64:

• Easy to use and convenient
• Ambient curing
• Service life equivalent to the structure’s life span
• Resistant to extreme temperatures (below zero)
• Thermal and mechanical resistance

Applications of Epoxy Adhesive EP64:

• General purposes
• Joints and connections
• Stone, slabs, concrete, metal

Application Instructions for Epoxy Adhesive EP64:

Step 1: Preliminary Requirements and Preparation Before Application

• Ensure the surface is completely dry and free of moisture and dust or any particles.
• Use the correct ratio of Component A (resin) to Component B (hardener). Avoid altering the ratio which is 1:1 (one part resin to one part hardener) for Epoxy adhesive Ep64.
• Do not add other materials (e.g., thinner or other diluents) to Component A (resin) or Component B (hardener).
• The recommended ambient and surface temperature range for application is 20-30°C.
• Avoid heating materials with an open flame or direct heat.
• Seal the resin and hardener containers tightly after use.
• Prevent the resin and hardener containers from mixing with water or moisture.
• Stir the hardener thoroughly for one minute until fully homogeneous before mixing with the resin.
• Store materials at room temperature (20-30°C).

Step 2: Method for Applying Manapoxy EP64 Adhesive

1. Allow the adhesive to acclimate to room temperature (20-30°C) at least one day before use.
2. Weigh the required amount of resin and mix with the hardener for 3 minutes, ensuring a continuous and steady motion.
3. Maintain a precise 1:1 mixing ratio (e.g., 100g of resin to 100g of hardener). Mix until color is uniform before application.
4. The adhesive mixture will gradually heat up after mixing. Initially, it may thicken, but it will soften again due to the reaction heat. The mixture will harden completely after 45 minutes (gel time).
5. At 25°C, the initial curing time is 45 minutes, secondary curing time is 6 hours, and complete curing time is 5-7 days.
6. If materials appear separated in storage, gently mix to restore homogeneity before use.
7. Use gloves and a mask during application.

Suitable Surfaces for Epoxy Adhesive EP64:

• Construction projects
• Stone facades
• Installation of various stone slabs
• Countertops, islands, and vanities
• Waterproofing and sealing tiles and ceramics
• Anchoring angles, bolts, and rebars
• Seismic strengthening of structures
• Structural reinforcement applications

Storage and Safety Precautions:

• Store in a dry place, away from direct sunlight, water, and rain.
• Ensure to store the adhesive at temperatures above 15°C. Do not allow the product to freeze.
• In its original packaging, the adhesive can be stored for over 1 year at 15-30°C.
• The Epoxy adhesive is non-toxic but it is recommended to use gloves, goggles, and workwear during application.
• If in contact with skin or eyes, rinse with water.

 Epoxy Adhesive EP64– Purchase and Warranty:

Epoxy adhesive EP64, designed and formulated by Mandana Polymer, is suitable for both dry and wet environments. It is extensively used in construction projects, countertops, waterproofing, and sealing applications. Mandana Polymer offers this premium epoxy adhesive with a one-year warranty and 10 years of after-sales service.

Epoxy Adhesive is manufactured with advanced technologies and offers the best price-to-performance ratio. For purchasing or inquiries about prices, please contact Mandana Polymer’s sales or technical support team.