EPoxy EP60 Adhesive

Introducing Epoxy Adhesive EP60:

The EP60 two-component epoxy adhesive, known as “Manapoxy EP60,” is a paste-like adhesive based on epoxy resin and amine-modified hardener. This solvent-free adhesive contains minimal volatile organic compounds (VOCs). Manapoxy offers exceptional adhesion and mechanical strength, creating a permanent bond. It is formulated for use in both dry and wet environments, making it versatile for various construction applications.

Manapoxy EP60, one of the bestselling and widely used products by Mandana Polymer Engineering Company, has undergone rigorous quality control and standard testing to meet all relevant criteria before mass production.

Application Instructuins EP60 Epoxy Adhesive:

Step 1: Preparation and Pre-Application Requirements

• Ensure the surface is completely dry and free from moisture, dust, and debris.
• Use the correct ratio of Component A (resin) and Component B (hardener). Avoid altering the ratio which is 2:1 (two parts resin to one part hardener) for Epoxy adhesive Ep60.
• Do not add other materials (e.g., thinner or plasticizers) to Component A or Component B.
• The recommended application temperature is between 20°C and 30°C.
• Avoid heating the materials with open flames or direct heat sources.
• After using the materials, tightly seal the lids of the resin and hardener containers.
• Prevent any contact between the resin, hardener, and water or moisture.
• Mix the hardener thoroughly for one minute with a clean mixer until the material is homogeneous.

Step 2: Application Procedure for Epoxy adhesive Ep60

1. Keep the adhesive at room temperature (20°C to 30°C) for at least 24 hours before use.
2. Measure the required amount of resin and mix it with the hardener. Stir gently and consistently for 3 minutes until fully blended.
3. The mixing ratio is 2:1 by weight (e.g., 100g resin to 50g hardener). Ensure precise measurements and thorough mixing for homogeneity.
4. After mixing, the resin begins to get warmer as the reaction starts. Within 20–30 minutes, the adhesive will reach a high temperature (around 70°C) and start to solidify. Complete hardening occurs within 45 minutes.
5. At 25°C, initial drying takes 45 minutes, secondary drying takes 6 hours, and complete curing requires 5–7 days.
6. If the adhesive or hardener separates into two phases after long storage, gently mix the contents to re-homogenize them before combining.
7. Although the Epoxy adhesive is a non-toxic material, wearing gloves and a mask during application for safety is recommended.

Technical Specifications for Epoxy Adhesive EP60:

Surfaces Suitable for EP60 Adhesive:

• Construction projects
• Stone facades
• Installation of stone slabs
• Countertops, kitchen islands, and sinks
• Waterproofing and sealing ceramic tiles
• Fixing angles, bolts, and rebar
• Seismic retrofitting of buildings

Storage and Safety Guidelines:

• Store in a dry location away from direct sunlight, water, and rain.
• Maintain a storage temperature of 15°C to 30°C; avoid temperatures below 15°C. Do not allow the product to freeze.
• Shelf life in original packaging is over 12 months under recommended conditions.
• The adhesive is non-toxic but using gloves, goggles, and work attire are recommended during application.
• In case of skin or eye contact, rinse with water.

Purchasing EP60 Epoxy Adhesive:

Epoxy Adhesive EP60 is available with a 1-year warranty and 10-year after-sales service. Mandana Polymer, with over 12 years of experience in producing high-quality epoxy adhesives, guarantees the durability and reliability of your construction projects with this product.

For inquiries and pricing details, contact Mandana Polymer’s sales or technical support team, and ensure a long-lasting solution for your waterproofing, sealing, and structural reinforcement needs.