Introducing Epoxy Adhesive EP62:
Epoxy adhesive EP62 is a paste-like rebar anchoring adhesive based on epoxy resin and an amine-modified hardener, supplied in cartridge form. Its cartridge-based system is highly preferred due to its ease of use and low error rates during application. The viscosity of Mana Epoxy EP62 is specifically designed to be suitable for anchoring bolts and rebars on both horizontal and vertical surfaces.
This adhesive is solvent-free with very low volatile organic compounds (VOCs). It offers exceptional mechanical strength and bonding properties, creating permanent connections. The formulation is tailored for use in both dry and wet environments.
Epoxy adhesive EP62 is one of the most popular and best-selling products of Mandana Polymer Engineering Company. Its performance and quality are comparable to foreign brands like Hilti adhesives, yet it is available at a third of the price. The product is verified by rigorous quality control tests before mass production to ensure compliance with all relevant standards.
Features and Advantages of Epoxy Adhesive EP62:
- Easy application suitable for all climatic conditions
- Resistant to weather changes
- Durable connections with a lifespan equal to the structure
- Usable on dry, wet, and water-saturated concrete
- Shrink-free (no shrinkage)
- Non-drip formulation with rapid initial curing time
- Resistant to vibration and impact
- High mechanical and impact resistance
Applications of Epoxy adhesive EP62:
- Anchoring various bolts, screws, and nuts in concrete structures on vertical and horizontal surfaces
- Installing rebars in concrete structures on vertical and horizontal surfaces
- Bonding metal angles to concrete
- Repairing and restoring cracked concrete
Application Instructions for Epoxy Adhesive EP62:
Step 1: Pre-application Preparation
- Ensure surfaces are free from dust, moisture, grease, and other contaminants. Improper surface preparation can significantly reduce adhesion.
- Use the correct ratio of Component A (resin) to Component B (hardener). Avoid altering the ratio which is 3:1 (three parts resin to one part hardener) for Epoxy adhesive Ep62.
- Ideally, the anchoring holes should be dry during application.
- Avoid adding any external substances (e.g., thinner or other diluents) to the cartridge contents.
- Optimal temperature for application is between 20°C to 30°C.
- Avoid heating materials with open flames or direct heat.
- Store the EP62 cartridges at 20°C to 30°C.
Step 2: Application Process
1. Clean the anchoring holes thoroughly using compressed air and a wire brush to remove debris.
2. Remove the initial caps from components A and B of the cartridge and attach the mixer nozzle.
3. Place the cartridge into a suitable twin-barrel injection gun. Inject the adhesive by pressing the gun’s trigger, ensuring complete mixing of the two components during application.
4. Inject the adhesive uniformly from the bottom of the hole to avoid air entrapment, filling two-thirds of the hole.
5. Clean the rebars to remove rust, contaminants, and grease. Insert them into the filled hole, twisting to ensure full contact between the rebar and adhesive.
Storage and Safety Precautions:
- Avoid moving the rebar until the adhesive has reached its initial cure.
- Store the cartridge at room temperature (20°C–30°C) for at least one day before use.
- After mixing resin and hardener, the adhesive gradually heats up, initially becoming slightly stiff, and then softening due to the reaction heat. The mixture fully hardens after approximately 45 minutes (gel time).
- At 25°C, the initial curing time is 45 minutes, secondary curing takes 6 hours, and full curing is achieved within 5 to 7 days.
- The adhesive is non-toxic but using gloves, goggles, and work attire is recommended during application.
- In case of contact with skin or eyes, rinse with water.
Manapoxy EP62– Purchase and Warranty:
Manapoxy EP62 is available in cartridge form, ideal for anchoring rebars and bolts on both vertical and horizontal surfaces. With over 12 years of manufacturing expertise in adhesives and waterproofing, Mandana Polymer offers Manapoxy EP62 at an exceptional price, along with a one-year warranty and 10 years of after-sales service.
For inquiries about pricing and availability, contact experts at Mandana Polymer Engineering Company. The contact information is provided in company website.







