P40 Two-Component Sealant Adhesive

Introducing P40 Two-Component Sealant Adhesive?

The P40 Two-Component Sealant Adhesive offers exceptional resistance and outstanding adhesion to a wide range of surfaces, including stone, concrete, metal, ceramic, and wood. Developed exclusively by Mandana Polymer, a knowledge-based company specializing in advanced polymer elastomer and cement-based waterproofing solutions, this adhesive is engineered to seal gaps, cracks, and grooves on all surfaces (floors and walls). The P40 sealant prevents re-cracking and prepares the surface for waterproofing.

This adhesive is ideal for underlayment and sealing hairline cracks up to 1 mm on surfaces such as balconies, pools, saunas, jacuzzis, rooftops, and other building components requiring waterproofing. Easy to apply with a spatula, the P40 adhesive is cost-effective and versatile. Following the application, surfaces can be waterproofed, tiled, or paved. The P40 sealant is highly resistant to erosion, abrasion, positive and negative pressure, UV exposure, various environmental conditions, as well as acidic and alkaline substances.

Application Method for P40 Two-Component Sealant Adhesive:

Hereunder is a step-by-step guide for applying the P40 sealant adhesive:

Step 1: Preparing the Surface

• Use the P40 adhesive to fill small gaps and cracks. Repair all seams and cracks using P40.
• Deep gaps or uneven surfaces should first be repaired using concrete or Underlayment Mortar 801-WP80.
• After pouring concrete, ensure it is fully cured before applying the adhesive. Old concrete surfaces should be cleaned to remove dirt and grease before starting.

Step 2: Pre-Application Recommendations

• Clean, sweep, and dry the surface thoroughly before application.
• Avoid applying P40 adhesive at temperatures below 15°C or during rainy days.
• Do not store materials at temperatures below 5°C.
• Prevent freezing of the materials in their storage containers.

Step 3: Preparing Materials and Tools

Required Materials:

• Adhesive powder
• Resin solution
• Tools Required:
• Spatula

Step 4: Application of P40 Two-Component Sealant Adhesive

• Stir the P40 solution for 2 minutes.
• Mix 200 grams of adhesive powder with 100 grams of resin solution until fully homogenized. (Inadequate mixing may result in surface cracking after application.)
• Adjust the consistency of the mixture according to the application area, making it thicker or thinner as required.

Important Notes for P40 Two-Component Sealant Adhesive application:

Drying Time:

Each layer of Isopol waterproofing adhesive takes approximately 3–4 hours to dry at a standard temperature of 25°C. Full curing requires about 48 hours.

Note: Lower temperatures increase the drying time for waterproofed surfaces.

Suitable Surfaces for P40 Two-Component Sealant Adhesive:

• Concrete and stone surfaces
• Clay and brick surfaces
• Cement and plaster surfaces
• New and old buildings
• Bathrooms
• Pools
• Facades and walls
• Repairing surfaces with bitumen, tar, or asphalt insulation
• Tile and ceramic surfaces

Storage and Safety Guidelines for P40 Two-Component Sealant Adhesive:

• The product can be stored for up to 12 months in its original 2 kg factory packaging.
• Store in a dry place, away from direct sunlight, water, or rain.
• Avoid storing containers at temperatures below 5°C.
• Prevent the contents of the containers from freezing.
• While the P40 adhesive is non-toxic, it is recommended to wear gloves, goggles, and work clothing during application.
• This material poses no health or environmental hazards. However, if it comes into contact with the skin or eyes, rinse immediately with water.

P40 Sealant Adhesieve– Purchase and Warranty: 

For sealing seams and cracks of surfaces, you can rely on P40 sealant adhesive. Mandana Polymer Company, with over 12 years of experience in the production and distribution of IsoPol waterproofing and polymeric materials, guarantees a 10-year warranty on the product. The price of the membrane depends on the application and surface type, the surface porosity.

Mandana Polymer offers the best quality P40 sealant adhesive with a proven track record in Iran. With detailed application instructions, you can easily apply this durable product yourself and enjoy its longevity. For pricing inquiries and purchasing, contact our experts at Mandana Polymer. Contact the information which is provided in company website.