Metal Waterproofing Coating

Introducing Isopol WP40 Metal Waterproofing:

Metal and galvanized steel surfaces are widely used in various industries, especially in construction and roofing. To enhance their resistance to water and moisture, waterproofing these surfaces is essential. Metal surfaces are prone to corrosion, rusting, and decay, which makes waterproofing a necessary measure. Additionally, metal waterproofing helps to minimize thermal losses in various building components, including pipes and ducts, while preventing sound transmission and moisture penetration.

The ideal choice for waterproofing metal surfaces and preventing leaks in metal roofs is polymer-based waterproofing. Due to their liquid nature, these coatings conform to all roof shapes, sealing around roof joints, seams, welds, and metal connections. They are suitable for all profiles and configurations of metal roofs. Isopol Waterproof Coating for Metal and Galvanized Surfaces is available in liquid form and custom colors. It can be easily applied to all metal surfaces, forming a durable, water-resistant layer that adheres strongly and acts as a waterproof, impact-resistant, and abrasion-resistant protective coating. This product is a superior alternative to bitumen-based waterproofing solutions (isogam), offering numerous advantages over traditional waterproofing products like sheets, rolls, and torches, particularly in renovation projects. It eliminates the need for heat or flame application, complies with all safety and health standards, and serves as an ideal waterproofing solution in the construction industry.

If your roof has been previously waterproofed but is now leaking, don’t worry. Isopol Metal Waterproof Coating is the perfect solution for resealing and renovating roofs of villas, homes, warehouses, and factories. Finding a quick-drying, waterproof paint for metal can be challenging, but Isopol Metal Waterproofing offers rapid application without disrupting workplaces or homes. This easy-to-use, odorless, solvent-free product allows for quick application without the need to remove damaged waterproofing or roofing materials, saving you time and money. Isopol fights rust and flaking and is fully UV-resistant. Applied directly to metal surfaces, it delivers 100% waterproofing with strong adhesion and acts as a water-repellent paint for metal. This fast-acting waterproofing coating protects the lifespan, appearance, and performance of roofs for all types of structures.

Isopol WP40 Waterproof Coating for Metal Surfaces meets the international British standard BS EN 14891 and is the only Isopol waterproofing product in Iran that carries a factory certification, Produced by the innovative Mandana Polymer company. This coating is distinct from ordinary paints, which deteriorate and flake due to water penetration and oxidative corrosion.

Application Method for Isopol Metal Waterproof Coating:

The application of Isopol Metal Waterproofing Coating involves several key steps:

Step 1: Surface Preparation

• Fill gaps, seams, and joints (e.g., screws) between metal sheets using PU110 Polyurethane Sealant according to the product’s instructions.
• For wall-to-wall or wall-to-floor connections, apply a 45-degree fillet using PU110 Sealant or WP80 Undercoat or P40 sealant as instructed.

Step 2: Pre-Application Recommendations

• Clean the surface thoroughly with Mandana Polymer’s anti-grease foam washing solution, sweep, and dry it as instructed.
• Ensure the application temperature is between 15°C and 25°C. Avoid application on rainy days or at temperatures below 15°C.
• Prevent freezing or storage of the waterproofing material below 5°C.

Step 3: Preparing Materials and Tools

Materials Required:

• WP30 Primer
• WP40 Isopol Metal Waterproof Coating
• Manator SWP2 Mesh (if needed)
• Undercoat materials (if required) such as WP80 or P40 sealant

Essential Tools:

• Putty knife/ trowel
• Long-handled roller
• Paintbrush

Important Points for Isopol WP40 Metal Waterproofing Application:

Consumption of Materials: The consumption of the primer is approximately 100 grams per square meter. For IsoPol WP40 metal waterproofing, the average consumption per layer is around 500 grams to 1 kilogram per square meter, depending on the area’s usage. One kilogram of the waterproofing material typically covers 4–5 square meters.

• WP30 Primer: ~100g/m²
• WP40 Waterproof Coating: ~200-250g/m² per layer (coverage: ~4-5 m²/kg).

Drying Time:

Each layer of the waterproofing material requires about 3–4 hours to dry at 25°C. Final drying takes about 48 hours. In colder temperatures, drying times will be longer.

Initial drying: 3-4 hours at 25°C.

Final curing: 48 hours.

Compatible Surfaces for IsoPool Coating:

• Plaster surfaces
• Fiber-reinforced areas
• Historical and ancient buildings
• Pre-fabricated components
• Bridges
• Old and new buildings
• Building facades, villas

Storage and Safety Precautions:

• Metal waterproofing is non-toxic material. For safety use gloves, goggles, and work wear during application.
• Store in a dry area away from direct sunlight and rain.
• Do not store below 5°C or allow contents to freeze.

Isopol WP40 Metal Waterproofing– Purchase and Warranty: 

For a leak-free areas like matal roofs or matal surfaces that will last for years, you can rely on IsoPol metal Waterproofing Membrane. Mandana Polymer Company, with over 12 years of experience in the production and distribution of IsoPol waterproofing, guarantees a 10-year warranty on the product. The price of the membrane depends on the application and surface type, with coverage ranging from 200 grams to 1 kilogram per square meter. By using IsoPol metal waterproofing, you ensure an area free from leaks and resistant to all weather conditions, maintaining its effectiveness for many years.

Mandana Polymer offers the best quality metal waterproofing coatings with a proven track record in Iran. With various color options and detailed application instructions, you can easily apply this durable product yourself and enjoy its longevity. For pricing inquiries and purchasing, contact our experts at Mandana Polymer. Contact the information provided in company website.