Polyurethane Hardener D100

Polyurethane is a single-component or two-component product based on polyurethane resin. Two-component polyurethane resin requires a second component, the hardener, to cure.

Polyurethane Primer WP200

Application Method and Execution

Technical Specifications

Features of Polyurethane Primer

Applications and Surfaces to Apply

Physical and Chemical Properties

Storage and Product Considerations

Safety and Protection

Product Standards and Certifications

Related Products

What is Polyurethane Hardener D100?

Polyurethane is a single-component or two-component product based on polyurethane resin. Two-component polyurethane resin requires the second component, the hardener, to cure. The hardener reacts with oxygen to harden and gel over time, so the container lid must be tightly closed after each use to prevent exposure to air and moisture. Hardener should be kept out of reach of children, and a mask is recommended when mixing with resin. The application environment should have proper ventilation, and direct and continuous skin contact should be avoided. The hardener is flammable and should be kept away from heat and flames.

How to Use Polyurethane Hardener D100?

Step 1: Preparation

Polyurethane hardener is used as a curing agent in fast-curing coating systems. The amount of hardener used depends on the resin and hardener mixing ratio. Before using the hardener, the resin should be mixed for two to three minutes with a clean stirrer.

Step 2: Application Method

The recommended amount of Polyurethane Hardener D100 (10% by weight) is added to the polyurethane resin. For example, 10 grams of Polyurethane Hardener D100 is mixed with 100 grams of polyurethane resin. After accurately weighing the required amount of resin and hardener, mix the resin and hardener gently for 3 minutes.

Allow the resin and hardener mixture to rest for 3 to 5 minutes to let any air bubbles from stirring escape.

Then, apply Polyurethane WP220 using a brush or roller to the desired surface.

Conditions for Applying Polyurethane Hardener D100

• Temperature: 10°C to 35°C
• Relative Humidity: Maximum 70%
• Re-coating Time: 6 to 24 hours

Note: Avoid applying the hardener and polyurethane in humid conditions or during rainfall (on the day of application and the next 24 hours).

What are the Technical Specifications of Polyurethane Hardener D100?

• Water Resistance: Resistant
• UV Stability: Stable
• Adhesion to Concrete Surfaces: Excellent
• Chemical Resistance: Suitable

What Are the Features of Polyurethane Hardener D100?

• Excellent adhesion
• Resistant to water penetration
• Cost-effective
• Very high curing capability
• Suitable chemical resistance
• Ease of application

What Are the Applications of Polyurethane Hardener D100?

• As a curing agent in polyurethane flooring
• As a curing agent in polyurethane insulation

What are the Physical and Chemical Properties of Polyurethane Hardener D100?

• Application Temperature: 10°C to 30°C
• Working Time: 20 to 30 minutes
• Initial Drying Time: 8 to 12 hours
• Final Drying Time: 24 hours

How to Store and Handle Polyurethane Hardener D100?

Packaging:

• Shelf Life: 12 months in the original packaging
• Storage: Store in a dry place, away from direct sunlight, water, and rain
• Best Storage Temperature: 20°C to 30°C
• Avoid Freezing: The contents of the containers should not freeze
• After each use, ensure that the hardener lid is tightly closed.

Safety and Protection of Polyurethane Hardener D100

• Avoid contact with skin and eyes
• Use adequate ventilation in enclosed areas. This also helps speed up the drying of polyurethane.
• Always use safety gloves, appropriate respirators, and safety goggles during application
• Keep out of reach of children
• This product is flammable. Keep away from direct heat and flames
• Any sparks, welding, smoking, or lighting of flames in the application area is prohibited.

What Standards and Certifications Does Polyurethane Hardener D100 Have?

• Conforms to BS EN14891 Standard (United Kingdom)
• Conforms to AS/NZS 4858 Standard (Australia-New Zealand)
• Technical Certificate from the Research Center for Housing and Urban Development
• The only company with factory certification in Iran
• Licensed by the Ministry of Industry, Mine, and Trade
• Knowledge-based product certification
• ISO 9001, 14001, 18001, and IMS Certifications