Epoxy Stone Adhesive with Hardener 2260

Stone Resin (Stone Adhesive) is a two-component, solvent-free material based on epoxy resin and modified polyamine hardener with suitable viscosity, available in both paste and transparent forms.

Epoxy Two-Component Adhesive for Construction Materials

How to Use

• Preparation

Ensure the surface is completely clean and free from water or moisture.

The tools and containers used for mixing should be thoroughly clean.

Materials should not be frozen in storage containers.

• Temperature Requirements for Application

Before application, measure the surface and material temperature using a digital thermometer.

Make sure the temperature of the materials and the surface during application is between 20-30°C. If it is outside this range, contact Mandana Polymer’s technical department.

How to Apply Epoxy Stone Resin (Paste or Liquid)

Application Steps:

1. Prepare the work surface and control environmental factors (follow relevant instructions).
2. Chemically clean the surface if oil or grease is present using OP30 solution.
3. Apply Primer with Hardener 2260-EF10 according to the primer application instructions to seal the surface pores (if needed).
4. Apply Epoxy Stone Resin: Stir the epoxy resin for 2 minutes before adding the hardener. After adding the hardener, mix for 3 minutes, then allow the resin and hardener mixture to rest for 1 to 5 minutes before application. Once fully dried, proceed with the next step as per the instructions.

Important Notes:

• Never use hardeners other than the one specifically designed for Epoxy Stone Resin.
• Even small variations (as little as 10 grams) in the amount of hardener can ruin the final result.
• Carefully measure and weigh the exact amount of hardener using a precise industrial scale. Avoid using inaccurate scales or supermarket scales.
• Avoid mixing more than required for the top coat of epoxy with the hardener.
• For mixing quantities greater than one kilogram, use an electric mixer.

Technical Specifications of Epoxy Stone Adhesive with Hardener 2260

• Temperature Resistance: High
• Curing and Drying Time: Suitable
• Resistance to Weather Conditions, Water, and Temperature Changes: High
• Resistance to Chemicals and Acids: Resistant

Key Features of Epoxy Stone Adhesive with Hardener 2260

• High bonding strength to stone surfaces
• Can be applied to vertical and horizontal surfaces
• Excellent adhesion to various surfaces
• Easy to apply
• Penetrates cracks, gaps, and voids
• Creates an impermeable, seamless surface
• Resistant to water and chemicals
• Provides complete moisture insulation
• Can be applied at ambient temperatures
• Long-lasting durability
• Suitable for stone with various geometric shapes
• Improves strength

Applications and Surfaces Suitable for Epoxy Stone Adhesive with Hardener 2260

• Stone cladding and antique stone installation on concrete, stone, and plaster surfaces
• Natural stone industry
• Enhances gloss and appearance of building stone
• Bonds stone pieces to concrete, metal, and other materials
• Suitable for stone polishing
• Tiling and slab cutting
• Can be used on stone flooring
• Useful for decorative and building stone
• Repairs and strengthens various types of building stone

Physical and Chemical Properties of Epoxy Stone Adhesive with Hardener 2260

• Application Temperature: 25-30°C
• Coverage per Square Meter: 500 to 750 grams
• Color: Transparent or White
• Solvent: None
• Application Tools: Spatula, squeegee, roller, brush
• Initial Drying Time: 8 to 12 hours
• Final Drying Time: 24 to 48 hours

Storage and Considerations for Epoxy Stone Adhesive with Hardener 2260

• Packaging: 5-12 kg containers
• Shelf Life: 12 months in original packaging
• Optimal Storage Temperature: 10-30°C
• Store in a dry place, away from direct sunlight, water, and rain.
• Avoid storing the material at temperatures below 5°C.

Safety and Protection for Epoxy Stone Adhesive with Hardener 2260

The epoxy resin for stone is not toxic, but it is recommended to wear gloves, goggles, and work clothing during application.

This material does not fall within the hazardous or harmful category for health and the environment. However, if it contacts the skin or eyes, rinse immediately with water.

Standards and Certifications for Epoxy Stone Adhesive with Hardener 2260

• Conforms to BS EN14891 standard (UK)
• Conforms to AS/NZS 4858 standard (Australia-New Zealand)
• Technical certificate from the Housing and Urban Development Research Center
• Only company with factory standards in Iran
• Licensed by the Ministry of Industry, Mine, and Trade
• Certified as a knowledge-based company
• ISO 9001-14001-18001-IMS certifications