What is Epoxy Board and Circuit with EP702-HBA Hardener?

Epoxy Board, with its high thermal resistance, is used for encapsulating and insulating various electrical components, including electronic and telecommunication boards, and electrical coils. Due to its mechanical strength, adhesion, and high electrical resistance, the use of Epoxy Board in electronic industries is continuously growing. Properties such as high breakdown voltage resistance, availability in various colors, water resistance, chemical resistance, versatility in hardness or flexibility, dust and noise resistance, the ability to combine with various mineral fillers, and thermal and electrical shock resistance distinguish Epoxy Resin from other resins. EP702 Epoxy Board is specifically used for the insulation and encapsulation of electrical boards and components. After curing, it hardens and cannot be removed from the board or circuit, making the electronic component tamper-resistant and non-copyable.

How to Use Epoxy Board and Circuit with EP702-HBA Hardener

Pre-application Control and Recommendations for EP702

1. Ensure the surface is free from dust and moisture before application.
2. Maintain the workshop temperature between 20 to 30°C during application.

Application Procedure for Epoxy Board and Circuit with EP702-HBA Hardener

1. Stir the Epoxy Resin for 1 minute before adding the HBA Hardener.
2. After adding the Hardener, mix the hardener and Epoxy Resin for 3 minutes. Allow the mixture to rest for 1 to 5 minutes before application.

Important Notes

• Do not use any other hardeners apart from the one specified for Epoxy Board and Circuit.
• Even a 10-gram deviation in the amount of Hardener will compromise the result.
• Weigh all calculations and amounts of Hardener with a precise industrial-scale balance.
• Do not mix more Epoxy Resin with Hardener than required.

Features of Epoxy Board and Circuit with EP702-HBA Hardener

• Electrical, Mechanical, and Chemical Resistance: High
• Resistance to Environmental Factors and UV Light: Suitable
• Thermal Resistance: Higher than standard resins
• Impact Resistance: Fully resistant

Applications of Epoxy Board and Circuit with EP702-HBA Hardener

• Encapsulation of electrical components like capacitors, coils, relays, transistors, transformers, and motors
• Electrical cable encapsulation
• Encapsulation of electronic components
• Insulation for electronic boards
• Protection of electronic circuits sensitive to dust, moisture, and chemicals
• Surface insulation for metal surfaces

Physical and Chemical Properties of Epoxy Board and Circuit with EP702-HBA Hardener

• Color: RAL color match
• Application Tools: Trowel or spatula
• Initial Drying Time: 12 hours
• Final Drying Time: 24 hours

Storage and Considerations for Epoxy Board and Circuit with EP702-HBA Hardener

• Packaging: 1 kg containers
• Shelf Life: 12 months in original packaging
• Storage Conditions: Store in a dry place away from direct sunlight, water, and rain.
• Temperature Considerations: Do not store below 5°C
• Frozen Material: Do not allow the material inside containers to freeze.

Safety and Protection for Epoxy Board and Circuit with EP702-HBA Hardener

Epoxy Board and Circuit EP702 is not toxic, but it is recommended to use gloves, safety goggles, and workwear during application. This material is not classified as harmful to health or the environment. However, if contact with skin or eyes occurs, wash immediately with water.

Standards and Certifications of Epoxy Board and Circuit with EP702-HBA Hardener

• Conforms to BS EN14891 (UK) standards
• Conforms to AS/NZS 4858 (Australia/New Zealand) standards
• Technical certificate from the Research and Housing and Urban Development Center
• The only company with factory standards in Iran
• Certified by the Ministry of Industry, Mine, and Trade
• Knowledge-based license
• Certified with ISO 9001, 14001, 18001, IMS