Wall and Facade Waterproofing

Introducing Isopol Wall Waterproofing Solution

One of the most critical steps in construction is wall waterproofing. Building facades are not only vital for architectural identity and aesthetic appeal but also play a crucial role in resisting environmental factors, weather changes, moisture penetration, chemical exposure, heat, and cold. Wall and facade waterproofing prevent moisture from seeping through walls into the building.

Exterior wall waterproofing protects interior walls from water infiltration in commercial, residential, and other buildings. Over time, moisture can penetrate facade walls, often going unnoticed until mold forms. By the time it appears on interior walls, significant damage may already have occurred. At this point, both the exterior and interior walls may need to be waterproofed. Moisture penetration can reduce the lifespan of the structure and lead to costly repairs in the long term.

The liquid nature of Isopol Nano Wall Waterproofing penetrates cracks and crevices in facade and wall surfaces, filling all gaps. Its versatility allows application on various surfaces, including wood, concrete, plaster, cement, and more. Given municipal regulations prohibiting the use of bitumen sheets for side walls and the need to avoid repeated waterproofing costs with outdated materials, Isopol’s polymer nano facade waterproofing solution is highly recommended.

The Isopol Wall Waterproofing (WP60) has been recognized as the most reliable wall and facade waterproofing solution in the past decade. It is the only polymer wall waterproofing product with a factory standard certification and operational license in Iran. Unlike acrylic coatings that may peel and degrade over time, Isopol WP60 retains its integrity when exposed to air and sunlight. Its simple application method using a roller or spray gun makes it an efficient choice.

Application Method

Step 1: Surface Preparation
– Fill any cracks and gaps using Isopol Wall Waterproofing adhesive and putty, following the relevant guidelines.
– Level uneven surfaces through sanding or skimming to ensure smoothness.
– Avoid waterproofing on unstable, loose, or rough surfaces, as they compromise the effectiveness of the nano facade solution.

Step 2: Pre-Application Checks
– Clean, sweep, and dry the surface thoroughly before starting.
– The ideal application temperature is between 15°C and 25°C. Avoid applying below 15°C or on rainy days.
– Do not store Isopol Wall Waterproofing materials below 5°C to prevent freezing.
– Complete all layers of waterproofing within one or two consecutive days to maintain consistency.

Step 3: Materials and Tools Preparation
– **Required Materials:**
– WP30 Primer
– WP60 Isopol Wall and Facade Waterproofing solution
– Manator Mesh (if required)
– Undercoating materials (if necessary)
– **Essential Tools:**
– Trowel for filling
– Roller with handle
– Paintbrush
– **Additional Tools:**
– Manual broom
– Mixer for stirring waterproofing materials
– Protective gloves
– Containers for mixing materials

Step 4: Application Process
1. Apply WP30 Primer evenly on all facade and wall surfaces using a roller or brush. Use approximately 100g per square meter and let it dry for 3 hours at 25°C.
2. Follow up with WP60 Isopol Waterproofing solution as the second layer.
3. Once the second layer dries (approximately 4 hours at 25°C), apply a third layer for optimal protection.

Key Notes for Application

Material Consumption:
– **Primer:** ~100g/m²
– **WP60 Waterproofing solution:** 200-250g/m² per layer.
– **Total Coverage:** Each kilogram of waterproofing material covers approximately 2-3 m².

Drying Time:
– Initial drying: 3-4 hours at 25°C
– Full curing: 48 hours

Compatible Surfaces for WP60 Wall Waterproofing
– Concrete
– Brick
– Cement blocks
– Stone
– Plastered surfaces
– Fiber-reinforced structures
– Historical and heritage buildings
– Precast cement and concrete pieces
– Bridges
– New and old buildings
– Facades of houses and villas
– Sidewalls and vertical surfaces in rainy regions

Safety and Storage

– Isopol WP60 is non-toxic but using gloves, goggles, and workwear during application is recommended.
– This material poses no environmental or health risks but wash with cold water if it contacts skin or eyes.
– Non-flammable.
– Shelf life: 12 months in 4, 9, and 25 kg factory-sealed packaging.
– Store in a dry place away from direct sunlight, water, and rain.
– Avoid storing below 5°C to prevent freezing.

Additional Applications of Isopol Wall Waterproofing

The Isopol WP60 solution is primarily used as an exterior wall waterproofing agent for surfaces like brick and stone to enhance facade durability and prevent damage from water, natural pollutants, and chemicals. Additionally, it serves as an interior wall waterproofing agent for surfaces like plaster, painted walls, stone, and ceramic. It is effective in restoration projects to prevent moisture and mold in walls. Being water-based and environmentally friendly, it aligns with sustainable practices.

Pricing and Purchase Information

The price of Isopol Wall Waterproofing WP60 depends on factors such as project size, regional climate, surface area, and market fluctuations. For precise pricing and consultation, contact Mandana Polymer’s sales team using the details provided on the company website.