Introducing IsoPool Swimming Pool Waterproofing Coating
The IsoPool pool coating is a next-generation waterproofing solution designed and manufactured in accordance with the British international standard (BSEN 14891). Produced and supplied by Mandana Polymer Engineering Company, this product is an excellent choice for extending the lifespan of pool structures. Due to the direct exposure of pool structures to water and moisture, using a reliable waterproof coating is essential. The IsoPool pool coating is easy to apply on various surfaces and creates a durable layer resistant to water and moisture penetration.
This waterproof coating is ideal for insulating various types of swimming pools, agricultural water reservoirs, fish ponds, aquaculture tanks, and water storage tanks. It addresses the common issues associated with bitumen-based coatings and serves as an ideal waterproofing solution for pools. IsoPool pool coatings are available in a wide range of colors, with blue being the most popular choice.
The pool coating penetrates the concrete walls of pools and fountains, sealing all pores. With its high adhesion, it is the best choice for a durable pool coating, resistant to impact, abrasion, and UV radiation. Additionally, this anti-algae coating requires minimal maintenance and keeps the pool surface clean, protecting it from dirt, algae, and fungi.
IsoPool WP20 Waterproofing Coating
IsoPool WP20 is a single-component liquid coating that can be easily applied using a brush, roller, or spray gun on the pool floor and walls. This coating seals all cracks and gaps, preventing water and foreign particles from penetrating the structure. Its high resistance to water pressure and excellent adhesion to various surfaces prevent peeling and flaking, ensuring long-lasting protection of concrete, cement, and stone pool surfaces against water and moisture damage.
Application Instructions for IsoPool Coating
The application of IsoPool pool coating involves several key steps. Here’s a detailed guide:
Step 1: Surface Preparation
– All cracks, voids, and surface irregularities must be repaired using the IsoPool adhesive and sealant, as per the instructions. The surface should be completely leveled.
– Reinforce the joints (wall-to-wall, floor-to-wall) with fillets using WP80 underlayment mortar or P40 sealant. The corners should have a 45-degree angle.
– Ensure the base surface is stable, firm, and smooth. Unstable or uneven surfaces are unsuitable for the IsoPool coating.
– If the base surface consists of bricks or cement blocks, it must be uniformly plastered, and all gaps should be filled.
Step 2: Pre-Application Recommendations
– The surface must be thoroughly cleaned, swept, and dried before applying the IsoPool pool coating.
– Do not apply the coating at temperatures below 15°C or during rainy days.
– Consult Mandana Polymer experts for temperature control advice before application.
– Store the materials above 5°C to prevent freezing.
– Start and complete all coating layers within 1-2 consecutive days to avoid delays between applications.
– Ensure the materials in storage are not frozen.
– Newly constructed pools should have at least four weeks of curing time before applying the coating.
Step 3: Preparing Materials and Tools for Application
Materials Needed for IsoPool Coating:
– WP30 Primer
– IsoPool WP20 Waterproof Coating
– ManaTor Reinforcement Mesh (if needed)
– Underlayment materials (if needed)
Essential Tools for Application:
– Putty knife for surface filling
– Roller with a handle
– Paintbrush
Additional Tools:
– Hand broom
– Mixer for stirring the coating materials
– Gloves for safe handling
– Containers for mixing the coating materials
Step 4: Application Process for IsoPool Pool Coating
- Primer Application
Apply one layer of WP30 primer to all parts of the pool (walls, floor, edges, and external walls exposed to the environment) using a roller. Use approximately 100 grams of WP30 primer per square meter. Allow the primer to dry for 3 hours at 25°C.
- First Layer with Reinforcement Mesh
Simultaneously apply the first layer of IsoPool WP20 coating and install the reinforcement mesh. Ensure there is no overlap between mesh sections, maintaining a 2mm gap between them. Mesh edges near the wall corners should stop 2cm before the corner. Avoid extending a single piece of mesh across corners (e.g., wall-to-wall or wall-to-floor).
If some sections of the mesh remain unadhered due to uneven surfaces, fill the gaps with WP80 underlayment or P40 sealant before applying the second layer of IsoPool WP20 coating.
- Second and Third Layers
After the first layer dries (approximately 4 hours at 25°C), apply the second layer. Repeat the process to ensure complete coverage and achieve a durable waterproofing layer.
Important Notes for Application
– Mesh Usage: Use ManaTor reinforcement mesh in areas with high negative water pressure to ensure durability.
– Fillet Reinforcement: Properly reinforce pool joints with fillets to minimize water infiltration and leakage.
– Material Consumption:
– Primer: Approximately 100 grams per square meter.
– Nano Coating: 200-250 grams per square meter per layer. Each kilogram covers approximately 1-2 square meters in total.
– Drying Time:
– Each layer of IsoPool coating requires 3-4 hours to dry at 25°C.
– Full curing takes 48 hours. Lower temperatures increase drying time.
Compatible Surfaces for IsoPool Coating
– Indoor and outdoor residential swimming pools
– Public and private pools (sports and recreational
– Fish ponds and aquaculture tanks
– Saunas and Jacuzzis
– Concrete and metal water storage tanks
– Rooftop evaporative coolers
– Water pipelines
– Concrete and plastered surfaces
– Fiber-reinforced surfaces
– Urban water features
Maintenance and Safety Tips for IsoPool WP20
– IsoPool WP20 is non-toxic but it is recommended to use gloves, safety goggles, and protective clothing during application.
– In case of contact with skin or eyes, rinse thoroughly with cold water.
– The coating is non-flammable and environmentally safe.
– Store in a dry, shaded place, away from direct sunlight, rain, or water exposure.
– Avoid storing the product below 5°C to prevent freezing.
Purchasing IsoPool Waterproofing Coatings
The price of IsoPool coatings depends on the type of application, material, and surface area. Coverage varies based on pool type (e.g., swimming or agricultural pools), ranging from 500 grams to 1 kilogram per square meter.
Mandana Polymer Company, with 12 years of experience in supplying high-quality swimming pool coatings at factory prices, is ready to serve customers. For pricing inquiries, consultations, or purchases, please contact our sales or technical teams.
.svg)
.svg)
.svg)
