Isopol Waterproofing Primer

Introduction to Isopol Waterproofing Primer

Epoxy primers are an essential component in insulation and coating systems, serving as a preparatory layer before applying final coatings. The Isopol Epoxy Primer, specifically EF10, is a two-component system based on epoxy resin and polyamine hardener. This primer provides excellent adhesion to various surfaces, including concrete, metals, galvanized steel, and aluminum, ensuring superior bonding of the final layer to the substrate.

One of the key advantages of EF10 Primer is its high resistance to corrosion, moisture, and chemicals. It is particularly suitable for surfaces exposed to temperature fluctuations and harsh environmental conditions. Additionally, EF10 Primer is approved for use in metal tanks, coastal facilities, pipelines, and aluminum structures.

This primer does not require neutralization for application on new concrete surfaces and can be easily applied. Moreover, its resistance to waterproofing, corrosion, and alkaline substances further enhances its performance.

As a leading expert in construction chemicals, Mandan Polymer Innovators offers high-quality waterproofing solutions. By utilizing premium raw materials and state-of-the-art technology, the company delivers high-performance products tailored for various construction applications. Choosing Mandan Polymer products ensures durability and efficiency in waterproofing systems.

Application Method for Isopol Primer

The application process of Isopol Primer is outlined in the following steps. Read on for a comprehensive guide:

Step 1: Surface Preparation

Before applying the primer, the mosaic (tile or ceramic) surface must be thoroughly cleaned to remove any dirt or residue. This may require pressure washing or even grinding. The surface must be free of grease, dust, or any contaminants before priming. Since the quality of roof waterproofing depends on the substrate’s condition, weak, loose, or uneven surfaces are unsuitable for insulation.

Step 2: Pre-Application Checks and Recommendations

1. Avoid applying Isopol Primer at temperatures below 15°C or during rainy days.
2. Store the primer above 5°C to prevent freezing.
3. Ensure the stored materials do not freeze.
4. The primer can be applied using a spray gun, roller, or brush.
5. The ideal ambient and surface temperature for application is between 20°C and 30°C.

Step 3: Preparation of Materials and Tools

Gather the necessary materials and tools before starting the application:

Required Materials:

• WP30 Primer
• WP80, WP90, P100, or P40 undercoat materials (if needed)

Essential Tools:

• Putty knife for filling cracks
• Roller with a handle
• Paintbrush

Additional Tools:

• Hand broom
• Mixer for blending primer materials
• Gloves for safety
• Containers for mixing the components

Step 4: Application Process

For Concrete Surfaces:

✓ On non-oily concrete surfaces, washing with water and dust removal is sufficient before applying Isopol Primer. The surface should be thoroughly washed and completely dried before application. (Do not apply on damp or oily surfaces.) ✓ Allow Isopol Primer to dry for 5 hours under direct sunlight at temperatures above 25°C before applying the next layer (colored Isopol). ✓ Hairline cracks should be repaired using P40 two-component sealer, if necessary. ✓ Parapets and joints should be reinforced with WP80 – 801 undercoat, if required. ✓ After preparing the surface, apply WP30 Isopol Primer.

For Metal Surfaces:

✓ Before applying Isopol Primer, clean the metal and galvanized surfaces thoroughly with OP30 degreasing solution and let it sit for three hours. (Preferably, warm OP30 solution should be used.) ✓ Rinse with warm water and let the surface dry completely before applying the primer. ✓ Allow 5 hours of drying time under direct sunlight at temperatures above 25°C before applying the next layer (colored Isopol).

Important Notes for Roof Waterproofing Application

The consumption rate of Isopol Waterproofing Primer varies depending on the application area. The estimated usage is approximately 100g per square meter.

By following these guidelines, you can ensure a durable and effective waterproofing system for your surfaces.

Izopol WP30 Primer Drying Time

The drying time for each layer of polymer waterproofing varies. For Izopol WP30 Primer, the estimated drying time is approximately 3 hours.

Compatible Surfaces for Izopol Primer Application

Izopol WP30 Primer is highly adhesive and can be applied to various surfaces, including:

• Concrete and cement surfaces
• Mosaic, tile, and ceramic surfaces
• Bituminous and asphalt surfaces
• Industrial surfaces with galvanized iron or metal sheets
• Plastered surfaces
• Fiber-reinforced surfaces
• Brick, cement block, or clay structures coated with a concrete layer
• High-traffic passageways and waterproofed rooftops
• Heavy-load rooftops
• Mosque domes
• Metal surfaces
• Sloped surfaces

Storage and Safety Guidelines for Izopol Primer

• Izopol WP30 Primer is non-toxic, but it is recommended to wear gloves, goggles, and protective clothing during application.
• This product is not classified as hazardous to health or the environment. However, if it comes into contact with skin or eyes, rinse with cold water immediately.
• Non-flammable formula, ensuring safe application.
• Shelf life: 12 months in its original 1, 5, 10, or 18 kg factory packaging.
• Store in a dry place, away from direct sunlight, water, and rain.
• Avoid storage below 5°C to prevent material degradation.
• Ensure the product does not freeze inside the packaging.

Buy Izopol WP30 Primer

For a seamless, waterproof surface free from dampness, choose Izopol WP30 Primer. As a leading manufacturer of polymer-based waterproofing solutions, Mandana Polymer offers Izopol Primer with excellent adhesion to concrete, metal, and galvanized surfaces, ensuring a strong, long-lasting bond for waterproofing applications.

With high resistance to moisture and chemicals, Izopol WP30 Primer serves as a reliable base coat for subsequent protective layers.

For expert consultation and pricing information on Izopol WP30 Primer and other polymer waterproofing solutions, contact Mandana Polymer today.