Epoxy Topcoat with Hardener EF30

What is Epoxy Topcoat with Hardener EF30?

Epoxy topcoat is a durable, high-quality finishing layer made from a combination of epoxy resin and polyamine or polyamide hardener. Due to its excellent adhesion and chemical resistance properties, it is widely used in coating industrial, commercial, and residential surfaces. The topcoat is specifically designed to protect surfaces from moisture, chemicals, oils, and abrasion. It not only enhances the appearance with a glossy finish but also increases the surface’s lifespan. It is commonly used as a final coating for flooring and other surfaces.

How to Use Epoxy Topcoat with Hardener EF30?

Prerequisites:
– A scale is required to weigh the materials.
– Ensure the surface is completely dry and free from any moisture before application.
– Before applying the material, the surface must be thoroughly cleaned of dust and moisture.
– Correct mixing ratio of soft epoxy with hardener is mandatory (according to the attached resin and hardener mixing percentage table). Avoid deviating from the ratios.
– Do not add any other materials (such as thinner or other lubricants) to the epoxy or hardener.
– The ideal temperature for the environment and surface is between 20°C to 30°C.
– Avoid heating the materials with open flames or direct heat.
– If the surface is greasy, clean it with OP30 degreaser solution and let it dry completely.
– Ensure that all tools and containers used are completely clean and free from contaminants.
– Keep the resin and hardener containers tightly sealed.

Application Method for Epoxy Topcoat with Hardener EF30:

Materials Required:
– Epoxy Topcoat with Hardener EF30

Necessary Tools:
– Scale
– Roller, brush, or spray gun
– Electric mixer
– Gloves and safety mask
– Moisture measuring tools
– Spatula or trowel

Steps:
1. Keep the epoxy topcoat at room temperature (20°C to 30°C) for at least one day before use.
2. Ensure the surface is clean and free from dust and moisture.
3. Mix the epoxy topcoat for 2 minutes in a clean container with an electric mixer, then add the hardener as per the mixing percentage table and mix for another 3 minutes. Let the mixture rest for 1 to 5 minutes before applying it to the surface using a spatula or trowel.
4. The initial curing time is 12 hours, and full drying takes 24 to 48 hours.

Technical Specifications of Epoxy Topcoat with Hardener EF30:

Impact Resistance: Very high
Wear and Scratch Resistance: High
Adhesion to Various Surfaces: High
Durability: Long-term
Electrical Resistance: High
Thermal Resistance: High

Features of Epoxy Topcoat with Hardener EF30:

• Excellent Adhesion: Bonds well with various surfaces, enhancing the durability of the coating system.
  • Chemical and Abrasion Resistance: Resistant to chemicals, oils, and abrasion.
  • Moisture Protection: Prevents water and moisture penetration.
  • Glossy and Uniform Appearance: Creates a glossy and smooth surface after drying.
  • Long-lasting Durability: Offers a long lifespan in different environmental conditions.

Applications of Epoxy Topcoat with Hardener EF30:

• Industrial Flooring: For coating factory floors, warehouses, and workshops.
  • Protective Coatings: To protect metal and concrete surfaces from corrosion and damage.
  • Marine Projects: To protect surfaces against water and moisture in marine environments.
  • Steel Structures: Used to coat steel surfaces in heavy industries and construction.
  • Commercial and Residential Spaces: For beautification and strengthening of interior and exterior surfaces of buildings.

Technical Details of Epoxy Topcoat with Hardener EF30:

Color: According to RAL color chart
Initial Drying Time: 24 hours
Final Drying Time: 48-72 hours

Storage and Considerations for Epoxy Topcoat with Hardener EF30:

• Packaging: 5-15-25 kg containers
  • Storage Life: 12 months in original packaging
  • Store in a dry place, away from direct sunlight, water, and rain.
  • Avoid storing at temperatures below 5°C.
  • Do not allow the contents to freeze.

Safety and Protection for Epoxy Topcoat with Hardener EF30:

Epoxy Topcoat with Hardener EF30 is not toxic but it is recommended to wear gloves, goggles, and workwear during application. It does not fall under hazardous or harmful materials for health and the environment. In case of contact with skin or eyes, wash immediately with water.

Standards and Certifications for Epoxy Topcoat with Hardener EF30:

• Conforms to BS EN14891 UK Standard
• Conforms to AS/NZS 4858 Australia-New Zealand Standard
• Technical certification from the Housing and Urban Development Research Center
• The only company in Iran with factory standard certification
• ISO 9001-14001-18001-IMS certifications
• Certified by the Ministry of Industry, Mine, and Trade