Introducing Polyurethane Hardener D100:
Polyurethane is a single-component or two-component product based on polyurethane resin. A two-component polyurethane resin requires a second component—a hardener—to cure. The hardener reacts with oxygen to harden and cure, gradually transitioning into a gel-like state; therefore, the container lid must be tightly closed after every use to prevent exposure to air and moisture. The hardener must be kept out of the reach of children, and it is advisable to wear a mask when mixing it with the resin. The application area should be well-ventilated. Avoid direct and prolonged contact with the skin. The hardener is flammable; it must be kept away from heat sources and direct flames.
Key features of the D100 polyurethane hardener:
- Excellent adhesion
- Water resistance
- Cost-effective
- High hardening capability
- Good chemical resistance
- Ease of application
How to apply Polyurethane Hardener D100?
Step 1: Preparation
The polyurethane hardener serves as the hardening component in fast-curing coating systems.
The required amount of hardener depends on the specified mixing ratio of the resin and hardener. Before using the hardener, the resin should be stirred for two to three minutes using a clean mixer.
Step 2: Application Procedure
- Add the D100 polyurethane hardener to the polyurethane resin at the recommended ratio (10% by weight). This means mixing 10 grams of D100 hardener with 100 grams of polyurethane resin. After accurately weighing the required amounts of resin and hardener, stir the mixture gently for 3 minutes.
- Allow the mixture to rest for 3 to 5 minutes to let any air bubbles formed during stirring escape.
- Then, apply the WP220 polyurethane to the target surface using a brush or roller.
Application Conditions for D100 Polyurethane Hardener:
- Temperature: Between 10°C and 35°C
- Relative Humidity: Maximum 70%
- Recoating Interval: 6 to 24 hours
Important Note: Do not apply the hardener and polyurethane during humid weather or rain (on the day of application or within the following 24 hours).
Technical specifications of the D100 Polyurethane Hardener:
- Water penetration resistance: Resistant
- UV stability: Stable
- Adhesion to concrete surfaces: Excellent
- Chemical resistance: Good
Applications of D100 polyurethane hardener:
- As a hardening agent in polyurethane flooring
- As a hardening agent in polyurethane insulation
Physical and chemical properties of D100 polyurethane hardener:
- Application temperature: 10–30°C
- Gelling Time20 to 30 minutes
- Initial drying time: 8 to 12 hours
- Final drying time: 24 hours
Storage requirements and product considerations:
- Shelf life: 12 months in the original packaging.
- Store in a dry place, away from direct sunlight, water, and rain.
- The optimal storage temperature is between 20°C and 30°C.
- The contents of the containers must not be allowed to freeze.
- Ensure the lid of the hardener is tightly closed after each use.
Safety and Precautions for D100 Polyurethane Hardener:
- Avoid all contact with skin and eyes.
- Ensure adequate ventilation when applying in enclosed spaces; this also facilitates better curing of the polyurethane.
- The material is non-toxic, but wearing safety gloves, appropriate respiratory protection, and safety goggles during application is recommended.
- Keep out of reach of children.
- This product is flammable. Keep away from direct heat and open flames.
- The generation of sparks, welding, smoking, or the use of open flames is strictly prohibited in the application area.
Standards and certifications of Polyurethane Hardener D100:
- Compliant with the British standard BS EN 14891
• Compliant with the Australia-New Zealand standard AS/NZS 4858
• Technical Certificate from the Road, Housing and Urban Development Research Center
• The only company in Iran holding a factory standard certification
• Holds an Operating License from the Ministry of Industry, Mine and Trade
• Certified as a “Knowledge-Based” (knowledge-intensive) enterprise
• Holds ISO 9001, 14001, 18001, and IMS certifications
Polyurethane Hardener D100– Purchase:
The quality and durability of a polyurethane coating depend not only on the base material but also on the performance of its hardener. Polyurethane Hardener D100 by Mandana Polymer is designed to enhance the mechanical strength and chemical resistance of polyurethane coating systems, helping deliver more reliable performance and longer-lasting protection. Whether you are working on industrial or professional coating projects, choosing the right hardener is an essential step toward achieving a high-quality finish and dependable results.
Polyurethane Hardener D100 is manufactured with advanced technologies and offers the best price-to-performance ratio. For purchasing or inquiries about prices, contact Mandana Polymer’s experts. Contact information is provided in website company.








